The fuel economy of an engine is a performance indicator that comprehensively considers multiple factors, and the following are the main influencing factors:

1、 Design factors of the engine itself

Displacement and number of cylinders

Generally speaking, the larger the engine displacement, the higher the fuel consumption. Because large displacement engines require burning more fuel in each working cycle to generate power. For example, a 5.0L engine consumes more fuel under the same operating conditions compared to a 1.5L engine. The number of cylinders can also have an impact. Engines with a larger number of cylinders typically have smoother power output, but internal friction and component weight may also reduce fuel economy.

Combustion method and efficiency

Advanced combustion technology can improve fuel economy. For example, compared to traditional intake injection engines, direct injection engines can more accurately control the fuel injection quantity and injection time, making the fuel and air mix more evenly and burn more thoroughly. This helps to improve fuel efficiency and reduce fuel consumption. In addition, engines with high compression ratios can also improve combustion efficiency to a certain extent, as higher compression ratios allow fuel to burn more fully in the combustion chamber.

Air intake and turbocharging system

Turbocharging technology can increase the intake volume and power output without increasing the engine displacement. Using turbocharging on small displacement engines can achieve better fuel economy under certain operating conditions. Because turbocharged engines can operate in a small displacement manner by turning off the turbocharger under low load conditions, reducing fuel consumption; Under high load conditions, it can provide sufficient power.

2、 Operational factors of vehicles or equipment

Driving speed and load

For car engines, fuel economy is best when driving at economical speeds. For example, a typical sedan has a moderate engine load and low fuel consumption within the speed range of 60-90 kilometers per hour. When the vehicle load increases, such as when it is fully loaded with passengers or cargo, the engine needs to output greater power to drive the vehicle, and fuel consumption will also increase accordingly.

Driving style and habits

Radical driving styles such as rapid acceleration, sudden braking, and frequent gear shifts can reduce fuel economy. Because these operations will frequently put the engine in a high load state, consuming more fuel. Smooth driving, reasonable utilization of vehicle inertia, early prediction of road conditions and appropriate deceleration can effectively save fuel.

3、 External environmental factors

Temperature and altitude

In low temperature environments, the viscosity of engine oil increases, and the frictional resistance between various components increases. At the same time, the vehicle needs to consume more fuel to preheat in order to reach normal operating temperature. In high-altitude areas, due to thin air, the engine intake decreases, leading to insufficient combustion. In order to maintain power output, the engine may increase fuel injection, thereby reducing fuel economy.